How to ajust Anschutz 9003 pellets velocity

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
alyssonmsa
Posts: 3
Joined: Sun Oct 21, 2012 11:03 am

How to ajust Anschutz 9003 pellets velocity

Post by alyssonmsa »

Hi guys. Im from Brazil. I putted my air rifle to check the pellets velocity and I got 145m/s. The coach said the best is something between 170 and 180ms. But where are the regulator screw on the gun? I dont know. Can you send me some picture about it? Thanks!
BM
Posts: 101
Joined: Sun Mar 28, 2004 5:09 am
Location: Netherlands

Post by BM »

If you unscrew the system from the stick and rotate it halfway you will see a hole. In the front of this hole, pointed towards barrel there is a M6 screw. Use M6 Allen key to adjust. Rotate clockwise to increase speed. Take slow steps of 5 minutes each. Optimal speed is about 175m p/s.
alyssonmsa
Posts: 3
Joined: Sun Oct 21, 2012 11:03 am

Post by alyssonmsa »

Thanks for the reply. Yesterday I removed the gun and found that screw (I think I've found), but it was fully rotated. Or is it too hard? I tried to rotate clockwise but could not. There may have been a problem? Looking at the system, this is the first hole before the trigger system?[/quote]
Post Reply