ISSF rule change from 1st January 2013

A place to discuss non-discipline specific items, such as mental training, ammo needs, and issues regarding ISSF, USAS, and NRA

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Post Reply
jhmartin
Posts: 2620
Joined: Mon Nov 29, 2004 2:49 pm
Location: Valencia County, NM USA

Post by jhmartin »

Muffo wrote:Have you got a link to this rule. this will disadvantage cross dominant eye shooters in a big way
The rule I'm talking about is from the New Rules Summary Summary, Page 2.
My guess it will be placed in 7.2.4.7
Air Rifle Pistol Grip. The pistol grip may not extend more than 60mm from a
plane perpendicular to the centerline of the barrel (also applies to 300m Standard
Rifle).
How does this effect a cross dominant shooter?
muffo as guest

Post by muffo as guest »

At the moment it only has to fit in the box. When you turn the grip to an angle so that you don't have to bend your wrist, palm shelf at the rear of the grip is there for moved further away from the axis of the bore. This means that if you shot right hand left eye you won't b e Anne to have a full size palm shelf
jhmartin
Posts: 2620
Joined: Mon Nov 29, 2004 2:49 pm
Location: Valencia County, NM USA

Post by jhmartin »

Muffo ... are you talking rifle or pistol?
I've never seen anyone shoot an air rifle in the right shoulder using their left eye...
I'm confused
User avatar
Jason
Posts: 270
Joined: Tue Mar 02, 2004 10:17 pm
Location: NW Ontario

A compromise solution?

Post by Jason »

It's late and I should be in bed as I have to drive to a match in the morning, but I've been thinking about a compromise for the competition format, one that preserves the heritage of the sport while still providing the "excitement" that the ISSF believes the sport needs.

I'm a prone guy, so I'm not sure how this would work for 3-P or the pistol events, but it should be similar for air rifle, air pistol, free pistol (and prone). Here's what I'm thinking:

1. Start with a Ranking stage where all shooters fire 60 shots to establishing their ranking (or seeding). No decimal scoring, 60 minutes total time. Just as we do now.

2. Next is the Elimination stage, where shooters are paired up (top seed vs. bottom seed and so on) to fire 10 shots head-to-head. Decimal scoring, 10 minutes total time. Top 8 winning scores -- you have to win your pairing -- advance to finals, 10 minutes total time. Just as we do now for finals.

3. Now we reach the Finals round, where the new ISSF finals format comes in (I won't recap it here). To make the ISSF happy.

Shooters would get 15 minutes to sight in before Ranking, 10 for Elimination and 5 for Finals. This would have to be shot on one day so you wouldn't need extra time for sighters having already fired a bunch of shots that day. If the competition goes over two days I suppose they could allocate extra time to account for condition changes (or maybe not).

The kicker of course, to make this "more exciting" would be to incorporate all of Sparks' suggestions: heart rate monitors and SCATT/RIKA/Noptel displays overlaid on electronic targets with live streaming to social media and official competition websites. An upbeat, knowledgeable announcer to keep things rolling along and to work the crowd is a must, too -- cheering is encouraged (I'm thinking cowbells like they do for cyclocross).

Something for folks to chew on. . . .

Jason
Spencer
Posts: 1890
Joined: Fri Feb 24, 2006 9:13 pm
Location: Sydney, Australia
Contact:

Re: Air Rifle Pistol Grip

Post by Spencer »

Muffo wrote:
jhmartin wrote:I think some folks are misinterpreting this (new) rule.
Quick sketch to show how I'm interpreting how they are trying to limit limit the >>width<< of the grip. My guess especially on the chest side so that it does not become a support point if you shorten the stock.
Although I think they should identify the plane as a "VERTICAL" plane
My guess:
Image
For those adjustable grips, it would also set (depending on the PG depth) the max rotation you could put on the grip
Have you got a link to this rule. this will disadvantage cross dominant eye shooters in a big way
Muffu, they are talking RIFLE!
User avatar
bluetentacle
Posts: 139
Joined: Mon Apr 26, 2010 12:38 am
Location: Los Angeles, CA

Post by bluetentacle »

jhmartin wrote:Like it or not, the sport is going to change.

There are "procedural" changes that can be adapted to, and it's hard to guess if they will hurt or help the sport. Nobody really likes change, but it's coming, it's here.

There are other equipment changes that are "whatever!". (Belt loops, Trousers in prone, Safety flags,etc)

There are some equipment changes that (I see) can definitely hurt the sport. These are changes will cause the dumping of equipment and purchasing new. Or if folks/clubs/programs cannot afford to buy new kit, they will move to another sport .... not really the "excitement" that was foreseen.

The last category, I think is where the majority of the outcry should be.
I agree with that. My jacket is banned under the "no seam under arm" rule. My whole rifle may be made illegal by the "no vibration reducing device rule". The equipment clauses are the most ridiculous ones.
kjbrowne
Posts: 9
Joined: Sun Aug 19, 2012 9:19 pm

Post by kjbrowne »

Why don't we just face facts. We are in a sport that is not visually exciting. The only people excited about watching shooting are shooters. The harder and more expensive we make the sport the less excited new shooters will be with attempting to become better shooters. If we make new shooters look at a future of buying new equipment at great expense every 3 years most of the younger ones (or their parents)are going to just give up. The sports most people persue require a ball or a bat and some shoes. They have speed or danger or pain that is visable to the viewing audience. The only way we will gain a TV audience is to line up half the finalists on one end of the range and the other half at the other end. I don't think that will happen. Anything else is just a lame expensive exercise in futility. I started as a high school 3p shooter. When I tried to move up I ran into the same wall of I need all new equipment. Once I got that the rules changed and I needed all new stuff and I gave up. Could I have gotten to the top? Probably not but think of the thousands of shooters that were in the same position and gave up. The attempt at improving this sport is probably what will kill it in the end.
User avatar
bluetentacle
Posts: 139
Joined: Mon Apr 26, 2010 12:38 am
Location: Los Angeles, CA

Post by bluetentacle »

Most Kurt Thune and Kustermann jackets in popular use are made illegal by the "no seams rule". To make them legal, one would have to send them back to the factory.

These jackets have been on the market for years. What benefit could possibly justify this?
BenEnglishTX
Posts: 326
Joined: Wed May 05, 2010 8:34 pm
Location: Texas

Post by BenEnglishTX »

jhmartin wrote:I've never seen anyone shoot an air rifle in the right shoulder using their left eye...
I've also never seen this with an air rifle but it's hardly unknown. Offset mounts may be indicated in situations where there's a sudden vision loss, a bad shoulder, severe cross-dominance or other problems unique to a particular shooter.

Here are examples of offset sights, both irons and telescopic, to enable shouldering a rifle on the right while sighting with the left eye:

Image

Image

I apologize to all for what was probably an OT aside.
KennyB
Posts: 396
Joined: Fri Sep 17, 2010 5:32 am
Location: London, England

Post by KennyB »

bluetentacle wrote:My whole rifle may be made illegal by the "no vibration reducing device rule".
Having spoken to an ISSF judge at a shoot today who has some knowledge of this subject, I get the impression that they are referring to a specific development rather than barrel tuners, de-resonators and other current passive vibration controlling mechanisms in stocks or actions.
Maybe someone has tried to get an active electronic damping system through equipment control....

As someone pointed out today - adjusting your bedding bolt torques could be construed as vibration control, as could using an extension tube.

Anyway,
I may be able to find out more tomorrow.
Keep calm and carry on.

K.
jhmartin
Posts: 2620
Joined: Mon Nov 29, 2004 2:49 pm
Location: Valencia County, NM USA

Post by jhmartin »

BenEnglishTX wrote:
jhmartin wrote:I've never seen anyone shoot an air rifle in the right shoulder using their left eye...
I've also never seen this with an air rifle but it's hardly unknown. Offset mounts may be indicated in situations where there's a sudden vision loss, a bad shoulder, severe cross-dominance or other problems unique to a particular shooter.
Ben ... I think Muffo was thinking of his pistol. I've seen offset sights in air (front & rear), but they had no effect on the "Air Rifle Pistol Grip".

I should have caught what Muffo was talking about when he mentioned the pistol sizing box.

My bad.

Kenny B ------ I'm sure you are correct, but that is not how it was stated in the rule summary ... The rule summary states "any type". The problem with these rules they pull out ... of thin air ... is that they need to be VERY specific of what they are going for, or some jury, somewhere will set a precedent of banning tuners, etc. I'm sure that's not what they want to do. I am ... I am ... (I think)
Last edited by jhmartin on Sat Sep 15, 2012 3:22 pm, edited 1 time in total.
User avatar
Sparks
Posts: 410
Joined: Tue Mar 02, 2004 10:44 am
Location: Dublin, Ireland
Contact:

Post by Sparks »

KennyB wrote:Maybe someone has tried to get an active electronic damping system through equipment control
What, someone strapped a gyro stabiliser to a pistol or a rifle? Because I'd find it hard to believe someone built a system that accurately and actively compensated for the vibration from firing a shot - the timeframes involved are just too short for that.
KennyB
Posts: 396
Joined: Fri Sep 17, 2010 5:32 am
Location: London, England

Post by KennyB »

Sparks wrote:
KennyB wrote:Maybe someone has tried to get an active electronic damping system through equipment control
What, someone strapped a gyro stabiliser to a pistol or a rifle? Because I'd find it hard to believe someone built a system that accurately and actively compensated for the vibration from firing a shot - the timeframes involved are just too short for that.
Sorry, I was just pulling an idea out of thin air - I don't know any specifics so I was hypothesizing....
jhmartin
Posts: 2620
Joined: Mon Nov 29, 2004 2:49 pm
Location: Valencia County, NM USA

Post by jhmartin »

Sparks wrote:
KennyB wrote:Maybe someone has tried to get an active electronic damping system through equipment control
What, someone strapped a gyro stabiliser to a pistol or a rifle? Because I'd find it hard to believe someone built a system that accurately and actively compensated for the vibration from firing a shot - the timeframes involved are just too short for that.
Sparks ... I work in that field ... you'd be surprised at how fast you can run a simple closed loop control system these days with embedded processors or FPGAs.
The radial & linear accuracy of 50m rifle shooting is not that great. It would be fairly expensive and you'd probably not use gyros (too noisy at those sizes), but it could be done.
User avatar
Sparks
Posts: 410
Joined: Tue Mar 02, 2004 10:44 am
Location: Dublin, Ireland
Contact:

Post by Sparks »

jhmartin wrote:Sparks ... I work in that field ... you'd be surprised at how fast you can run a simple closed loop control system these days with embedded processors or FPGAs.
The radial & linear accuracy of 50m rifle shooting is not that great. It would be fairly expensive and you'd probably not use gyros (too noisy at those sizes), but it could be done.
I'm kindof surprised at that - but I guess, it's been a decade since I worked with embedded systems and robotics, I suppose I shouldn't be that shocked...
jhmartin
Posts: 2620
Joined: Mon Nov 29, 2004 2:49 pm
Location: Valencia County, NM USA

Post by jhmartin »

Sparks wrote:I'm kindof surprised at that - but I guess, it's been a decade since I worked with embedded systems and robotics, I suppose I shouldn't be that shocked...
Google "satellite tracking wavefront compensation"
The "guns" here are 800lb+ beam directors that shoot light

On a terrestrial rifle (even at long ranges) your goal is not really to reduce the vibrations, but control the movement of the rifle induced by those vibrations. A "real" spinning gyro could do it, but as I said those that spin fast enough, that are small enough (like those in an A-A missile) are only about $50K each.
If you used linear displacement mass actuators (one in X & one in Y), much cheaper and they easily have the required frequency response. You could use simple MEMS "gyros" as the sensors.
Muffo
Posts: 491
Joined: Sat Nov 22, 2008 4:50 am
Location: Victoria, Australia

Re: Air Rifle Pistol Grip

Post by Muffo »

Spencer wrote:
Muffo wrote:
jhmartin wrote:I think some folks are misinterpreting this (new) rule.
Quick sketch to show how I'm interpreting how they are trying to limit limit the >>width<< of the grip. My guess especially on the chest side so that it does not become a support point if you shorten the stock.
Although I think they should identify the plane as a "VERTICAL" plane
My guess:
Image
For those adjustable grips, it would also set (depending on the PG depth) the max rotation you could put on the grip
Have you got a link to this rule. this will disadvantage cross dominant eye shooters in a big way
Muffu, they are talking RIFLE!
Oh cheers, I was getting worried
Hon
Posts: 33
Joined: Mon Nov 10, 2008 10:31 am

Chest Rest new rule

Post by Hon »

Chest Rests. Any attachments (Brustanlagen) projecting forward from the lower portion of the butt plate are prohibited.

Does this means it is now illegal to support the rear stock on right chest if you are using a metal stock air rifle?

Like this? Image

So is it legal according to the new rule to use traditional wood stock and have it rest on the right chest?
David Levene
Posts: 5617
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Re: Chest Rest new rule

Post by David Levene »

Hon wrote:So is it legal according to the new rule to use traditional wood stock and have it rest on the right chest?
You'll probably only know when the rules are published.
User avatar
LukeP
Posts: 295
Joined: Thu Jan 18, 2007 10:19 am
Location: Italy
Contact:

Post by LukeP »

There is another change:
Athletes may use pistol transport boxes to take pistols and equipment to the shooting ranges, but pistol boxes or other stands or supports, except telescope stands, may not be placed on the bench or table, provided the bench or table complies with Rule 4.4.11.10 (0.70 m to 1.00 m high). During Finals, pistol transport boxes or equipment bags must not remain on the field of play.
Pistol Support Stands
Athletes may place pistol support stands on the bench or table use them to rest their pistols. The total height of the bench or table with the support stand on it may not exceed 1.00 m.
It's allowed to raise not over 1.00m, pistol boxes placed over the table are not allowed (like populars stormcase), i think only dedicated pistol stand.

But it's apparently contrary of this paragraph in general rules:
No one may change or modify any range structure or equipment (e.g. bench size, cutting mats, adding gun cases or boxes to the bench, etc.).
Post Reply