Pneumatic recoil damping
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
- Posts: 63
- Joined: Sat Mar 07, 2009 12:32 am
- Location: Portland, Oregon, USA
Pneumatic recoil damping
Which pistols have recoil damping with the assistance of pneumatics?
Any good explanations of these systems on the web?
Thanks
KWW
Any good explanations of these systems on the web?
Thanks
KWW
-
- Posts: 63
- Joined: Sat Mar 07, 2009 12:32 am
- Location: Portland, Oregon, USA
Re: Pneumatic recoil damping
If you ask for recoil damping stricto sensu, only the SSP. But pneumatics is also used to lock the breech in some big bore pistols like the H&K P7 (or PSP)keithwwalker wrote:Which pistols have recoil damping with the assistance of pneumatics?
Any good explanations of these systems on the web?
Thanks
KWW
-
- Posts: 123
- Joined: Fri Apr 10, 2009 10:24 am
- Location: Athens, HELLAS (GR)
Re: Pneumatic recoil damping
Do we still call it pneumatics in the P7 when its burnt powder gasses?jipe wrote: If you ask for recoil damping stricto sensu, only the SSP. But pneumatics is also used to lock the breech in some big bore pistols like the H&K P7 (or PSP)
And the P7 slide is never locked, its a delayed blowback arrangement.
-
- Posts: 63
- Joined: Sat Mar 07, 2009 12:32 am
- Location: Portland, Oregon, USA
Re: Pneumatic recoil damping
wiki has a nice graphic of the P7 delayed blowback, would be nice if there was a graphic on the SSP like that
Makris D. G. wrote:Do we still call it pneumatics in the P7 when its burnt powder gasses?jipe wrote: If you ask for recoil damping stricto sensu, only the SSP. But pneumatics is also used to lock the breech in some big bore pistols like the H&K P7 (or PSP)
And the P7 slide is never locked, its a delayed blowback arrangement.
Re: Pneumatic recoil damping
Pneumatic is by action of a gaz, not necessarily pure air !Makris D. G. wrote:Do we still call it pneumatics in the P7 when its burnt powder gasses?jipe wrote: If you ask for recoil damping stricto sensu, only the SSP. But pneumatics is also used to lock the breech in some big bore pistols like the H&K P7 (or PSP)
And the P7 slide is never locked, its a delayed blowback arrangement.
You are right, the exact name is delayed blowback and the breech is indeed not mechanically locked but remains closed until the bullet leaves the barrel and the pressure drops. By the way, even with a mechanically locked breech, it is also a delayed breech opening since after the small initial down+rearward movement of the barrel+breech assembly, the breech is unlocked.
When the breech opening starts, there is some pneumatic damping since the hole between the barrel and the reservoir is small just like in the SSP where there is a calibrated hole that allows the air to escape.
Re: Pneumatic recoil damping
Hadn't considered that, seems logical :)jipe wrote: When the breech opening starts, there is some pneumatic damping since the hole between the barrel and the reservoir is small just like in the SSP where there is a calibrated hole that allows the air to escape.
-
- Posts: 6
- Joined: Tue Apr 17, 2012 10:55 pm
In technical terms, the recoil caused by the gun exactly balances the forward momentum of the projectile and exhaust gasses according to Newton's third law. A recoil piston is slidably disposed in the recoil cylinder and is operatively connected via a piston rod to the gun barrel.
Pneumatic cylinders
Pneumatic cylinders