IZH 46 - how to replace O rings

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
sagara wimaladharma
Posts: 38
Joined: Mon Mar 29, 2004 5:04 am
Location: Hantana mountain kandy srilanka
Contact:
Contact sagara wimaladharma

IZH 46 - how to replace O rings

Post by sagara wimaladharma »

Dear friends,

There is a velocity problem in my Baikal 46M.
I tried in the you tube but I couldn't find a helping clip to replace the O ring.
could you please advise me how to replace the O ring.

Thanks
Sagara
Top
User avatar
Brian M
Posts: 262
Joined: Thu Nov 15, 2007 5:16 pm
Location: Warm Springs, GA
Contact:
Contact Brian M

Post by Brian M »

No video, but a powerpoint slideshow:

http://www.pilkguns.com/doityourself.shtml
Top
sagara wimaladharma
Posts: 38
Joined: Mon Mar 29, 2004 5:04 am
Location: Hantana mountain kandy srilanka
Contact:
Contact sagara wimaladharma

Post by sagara wimaladharma »

Dear Brian,

Great help.. Thank you so much.

Rgds
Sagara
Top
Gwhite
Posts: 3425
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Post by Gwhite »

One additional tip I learned from the Yale University pistol coach: The main seals are very stiff, and difficult to get off & on the piston. Heating them gently is supposed to make the process much easier. I haven't had a chance to try this yet, but I'm assuming a blow dryer would work well.
Top
sagara wimaladharma
Posts: 38
Joined: Mon Mar 29, 2004 5:04 am
Location: Hantana mountain kandy srilanka
Contact:
Contact sagara wimaladharma

IZH 46 O ring replacement

Post by sagara wimaladharma »

Thanks G White.
Rgds
sagara
Top
Post Reply

Return to “Olympic Pistol”