Anschutz 1913 vs 2013

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Dave IRL
Posts: 195
Joined: Mon Oct 26, 2009 10:25 am

Post by Dave IRL »

Any particular reason you think that? I use a standard length 1913 barrel, 690mm, and have a 10" Uptagrafft tube on it as well. If it's the weight you mean, then mine's bloody heavy, but I can still shoot it. The weight forward makes it extremely stable. Only criticism I feel is valid about it is that the weight tells on your hand in prone, quite badly.
WesternGrizzly
Posts: 278
Joined: Sat Jan 09, 2010 10:43 pm

Post by WesternGrizzly »

I have nothing against the 660 and 690 barrels if someone is shooting prone only, other than you pointed out they are very heavy, and add a scope to that, and they get even heavier. having shot both kinds, the shorter 500mm barrel balances much better in the other positions.

Another factor is the time it takes for the bullet to leave the bore. It takes less time for the bullet to leave in the 500mm barrel, and you may get a few points because of it. Although if you are relying on your barrel length to shoot your scores, you have your priorities all mixed up.
Matt
pratt2208
Posts: 54
Joined: Tue Mar 29, 2011 11:08 pm

Post by pratt2208 »

I was told by a shooter who used to own a 2013 that they can finicky is there any truth to this or was it just his rifle.
Jason
Dave IRL
Posts: 195
Joined: Mon Oct 26, 2009 10:25 am

Post by Dave IRL »

WesternGrizzly wrote:I have nothing against the 660 and 690 barrels if someone is shooting prone only, other than you pointed out they are very heavy, and add a scope to that, and they get even heavier. having shot both kinds, the shorter 500mm barrel balances much better in the other positions.

Another factor is the time it takes for the bullet to leave the bore. It takes less time for the bullet to leave in the 500mm barrel, and you may get a few points because of it. Although if you are relying on your barrel length to shoot your scores, you have your priorities all mixed up.
Matt
Balance is personal preference though. I love how solid and steady my rifle's weight-forward setup is. Sits dead solid on target. Lighter guns don't do the same for me, though they're easier on the system. For prone, the weight is deadening in recoil terms, and the really long sight radius (over a metre for me) is awesome, especially when the nerves are up in competition. Barrel time is a moot point I think. You dealt with it yourself, and I really don't think it matters if you're doing things right. Debevec never used a short barrel for the world record.
WesternGrizzly
Posts: 278
Joined: Sat Jan 09, 2010 10:43 pm

Post by WesternGrizzly »

pratt2208 wrote:I was told by a shooter who used to own a 2013 that they can finicky is there any truth to this or was it just his rifle.
Jason
I have never heard this.
matt
Tim S
Posts: 2054
Joined: Mon Jan 03, 2011 11:33 am
Location: Taunton, Somerset

Post by Tim S »

I have heard that 20xx rifles were more difficult to bed. I can't comment as I shoot a round action.

I can see how changing the barrel would affect the bedding. A fractional difference in the diameter of the barrel tenon, would alter how the receiver sits in the stock, due to the clamping.
Post Reply