palm rests

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
westerngriz

palm rests

Post by westerngriz »

i am looking for a palm rest. the problem is that I have SHORT arms.
I use a Stopper stock. the factory palm rest was too short. so i added a block that makes the palm rest about 3/4 of an inch taller. but it is still to short.
does anybody know if the Anschutz 9795 palm rest is imported?
matt
randy1952
Posts: 469
Joined: Tue Aug 22, 2006 10:48 pm

Re: palm rests

Post by randy1952 »

westerngriz wrote:i am looking for a palm rest. the problem is that I have SHORT arms.
I use a Stopper stock. the factory palm rest was too short. so i added a block that makes the palm rest about 3/4 of an inch taller. but it is still to short.
does anybody know if the Anschutz 9795 palm rest is imported?
matt
You can make your own block. The rail material can be bought from Champion Shooters. I have seen a fair number of home made blocks. For the most part they don't look pretty, but if your handy with wood finish you can make it look pretty.
westerngriz

Post by westerngriz »

can you provide a link to the rail material? I cant find it on the website.
matt
randy1952
Posts: 469
Joined: Tue Aug 22, 2006 10:48 pm

Post by randy1952 »

westerngriz wrote:can you provide a link to the rail material? I cant find it on the website.
matt
Try the link below and if that fails it is under "Accessories". The rails comes in 15" sections. Choose the right one there is apparently two different rails. One is for American style stocks and the other for European.

http://www.championshooters.com/store/home.php?cat=289
Sawyer
Posts: 44
Joined: Wed Mar 14, 2007 2:10 pm

palm rests

Post by Sawyer »

Here's one available at 10pt9.com. Take a look– great item at a great price.

http://www.10pt9.com/Rifle-Accessories/ ... -p135.html
westerngriz

Post by westerngriz »

I was actually looking at that one from 10pt9. I may replace the triangle with a rectangle of wood. Something like the MEC champion.
matt
Post Reply