Suhl 150/anschutz 54 comparison dimensions

jsealc21 · Post by **jsealc21** » Tue Mar 30, 2010 12:36 am

I am wanting to put a Suhl 150 barreled action into a 2013 stock I recently acquired. My question is...the Suhl is an east german copy of the round bottomed 54 action. There is an adaptor available to enable a 54 round action to fit into the flat bottomed 2013 stock. I am hoping some one can provide some dimensions for the 54 action,1813 or 1913,so I might compare them to my Suhl,to see if it's worth buying the adaptor,or necessary to build one from scratch. If any one has the action diameter,hole spacing,and relative distances of these holes from the recoil lug,and the barrel/action joint available, I would be most appreciative. Thankyou.

an1913t · Post by **an1913t** » Tue Mar 30, 2010 8:33 am

If the 2013 stock you have is the wood version, the Anschutz adpater won't work to begin with. It was designed for the AL version stocks.

jsealc21 · Post by **jsealc21** » Tue Mar 30, 2010 10:05 am

an1913t wrote:If the 2013 stock you have is the wood version, the Anschutz adpater won't work to begin with. It was designed for the AL version stocks.

that seems odd,after all ,the bottom of the action has to be the same configuration,as there is only one Anschutz flat-bottom action,and it fits both alu and wood stocks.