Sight darkener

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Guest

Sight darkener

Post by Guest »

Can one of those sight darkeners that come in the form of a lighter be safely applied to the rear sight of a modern pistol without fearing the soot to damage the internals of the adjustable rear sight?
Rifle shooter

best guess since no-one answered yet :^)

Post by Rifle shooter »

Hmmm, the "internals" are just screw threads. So maybe putting a tiny drop of oil on those threads, before "smoking them" would be enough to protect them.
Steve Swartz as Guest

Post by Steve Swartz as Guest »

Hmmm . . . never heard of any damage as a result of using any of the sight black products.

What are the corrosive properties of calcium carbide soot?

I think corrosion would be the main concern . . .
Ted
Posts: 121
Joined: Fri Mar 17, 2006 8:24 pm

Post by Ted »

Just my 2 cents worth. I tried the sight black stuff for a while and didn't like the mess associated with it (though it is not too much). I found a flat black permanet marker to be really good at darkening sights and less to fool with. Ever try this?
Spencer
Posts: 1890
Joined: Fri Feb 24, 2006 9:13 pm
Location: Sydney, Australia
Contact:

Post by Spencer »

Forty years of blackening the sights with soot (i.e. carbon) on one of my pistols has not caused any problems so far - who knows; in the long term (!) it might cause problems...

Spencer
User avatar
Ed Hall
Posts: 236
Joined: Fri Mar 07, 2008 10:42 pm
Location: Adirondack Mtns
Contact:

Post by Ed Hall »

A more real problem is the use of plastics for some sights. Make sure your sight is metal before letting any flame near it. I can't see why any respectabe manufacturer would use plastic, but from experience, I'm now cautious.

One of my Teammates tried to blacken another's revolver sights in the preparation time a couple years ago, to find the front sight lit on fire. It distorted a bit before they could put it out. I don't recall how well he shot, but I bet he really looked at that "newly formed" front sight through the match.

I would hope the use of plastic isn't a direction that many manufacturers are going to take, but just thought I'd toss out this note, just in case.

Take Care,
Ed Hall
Air Force Shooting Homepage
Bullseye (and International) Competition Things
Guest

Post by Guest »

All your advice is certainly appreciated. Thank you!

The pistol I'm thinking about is a Feinwerkbau AW93 which I figure uses all steel parts except for a piece of polymer next to the rear sight--not the rear sight itself.
guest2

Post by guest2 »

Anonymous wrote:All your advice is certainly appreciated. Thank you!

The pistol I'm thinking about is a Feinwerkbau AW93 which I figure uses all steel parts except for a piece of polymer next to the rear sight--not the rear sight itself.

try using black on the front sight only
putting it on the rear will only make you look at the rear instead of concentrating on the front
Guest

Post by Guest »

guest2 wrote:
Anonymous wrote:All your advice is certainly appreciated. Thank you!

The pistol I'm thinking about is a Feinwerkbau AW93 which I figure uses all steel parts except for a piece of polymer next to the rear sight--not the rear sight itself.

try using black on the front sight only
putting it on the rear will only make you look at the rear instead of concentrating on the front[/quote

any hair dressing supplier should have black temp colour in spray cans for a couple of dollars per can works well
Spencer
Posts: 1890
Joined: Fri Feb 24, 2006 9:13 pm
Location: Sydney, Australia
Contact:

Post by Spencer »

guest2 wrote:...putting it on the rear will only make you look at the rear instead of concentrating on the front
????????

an interesting theory, but...

Spencer
guest 2

Post by guest 2 »

Spencer wrote:
guest2 wrote:...putting it on the rear will only make you look at the rear instead of concentrating on the front
????????

an interesting theory, but...

Spencer
As Hans Standl wrote "the aiming eye does not focus on the target but on the sighting mechanism only particularly the foresight"
i only use sight black on the front sight and concentrate on the frontsight totally when aiming
i tend to only see the gap in the rear sight rather than whole sight

Or as Hans wrote " a shooter must seek to concentrate their full attention on nothing but the technically perfect execution of aiming and firing without necessarily wanting to hit the 10"

i guess that in the end shooting being the subjective thing it shouldn't be it dont matter where they put their sight black as long as they dont melt anything or clog anything up
Post Reply