Anschütz firing pins

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
User avatar
Paul
Posts: 166
Joined: Tue Mar 02, 2004 8:54 pm

Anschütz firing pins

Post by Paul »

I'd like to convert a 54 standard firing pin that I already have into a training firing pin. Could someone please let me know what is the lenght difference between a 1807-12 (standard) and a 1807T-12 (training) ?

Thanks in advance,

Paul
10x
Posts: 13
Joined: Mon Dec 27, 2004 12:18 pm
Location: ENGLAND

Post by 10x »

Hello Paul
When the Anschutz service people were at Bisley a few years back i asked for a new firing pin and also a training pin....They sold me a new firing pin, Then cut about 3mm off a old firing pin and gave it to me. The new pin is 130mm and the training pin 127mm....All you want it to do is not protrude outside the bolt so it does not hit the rim with a little on the side as a safty factor.......
Regards Adrian...
Post Reply