pos.22 sliding block left side is holding the grip to the frame so badly that it has eaten its way through the aluminum frame. This is a BAD construction! (Right side has a bit better grip) Screw to adjust trigger weight will not move anymore, fortunately it is OK as it is.
I can not recommend this free pistol anymore.
Kent
Hämmerli FP60!
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
The FP60 is essentially a clone of the 160 with a frame made of aluminium instead of steel. Externally, the shape of the frame looks different but internally, it is the same.
Pos 22 of the FP60 is pos 122 of the 160 with the same part number, same for the other side pos 19 of the FP60 = pos 121 of the 160. May be you
I am afraid that they just copy the design of the 160 replacing the steel with aluminium without really studying the consequences of the lower mechanical resistance of aluminium !
Pos 22 of the FP60 is pos 122 of the 160 with the same part number, same for the other side pos 19 of the FP60 = pos 121 of the 160. May be you
I am afraid that they just copy the design of the 160 replacing the steel with aluminium without really studying the consequences of the lower mechanical resistance of aluminium !