Removing Bolt

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
Misny
Posts: 993
Joined: Tue Mar 02, 2004 9:28 pm
Location: Indiana

Removing Bolt

Post by Misny »

I have noticed that many times bolts are removed from .22 rimfire rifles. There are even "holsters" available to hold the bolts. Is there a reason for keeping the bolt out of the rifle, besides safety?
User avatar
Jordan F.
Posts: 163
Joined: Thu Jun 07, 2007 10:03 am
Location: British Columbia, Canada

Post by Jordan F. »

Only reason I can maybe think of is that the bolt sticks up so high making it hard to close the gun case and maybe hard on the gun? But having said that I just keep it in the gun with the trigger compressed.
batty
Posts: 77
Joined: Sun Apr 18, 2004 5:45 pm
Location: Keighley, UK
Contact:

Post by batty »

As well as safety and storage, it is also done for securty issues.
little_doodie
Posts: 173
Joined: Wed Feb 25, 2009 7:12 am
Location: Easton, ma

Post by little_doodie »

Its mainly for the guns safety.
the bolt sticks out alot further than the rest of the stock.
if the case was handled extremely rough it could crack or break the stock.
I have heard of many cases of airlines damaging rifles that have the bolt installed.
A good rule of thumb with shipping a rifle is to loosen the action screws, remove the bolt and sights.
User avatar
WarWagon
Posts: 271
Joined: Mon Dec 31, 2007 11:09 pm

Post by WarWagon »

Also makes the TSA easier to convince that the gun "is not loaded" when you're traveling, as ridiculous as it sounds. Most of those people haven't the faintest clue what they're looking at.
Eric U

Post by Eric U »

In some rimfire and centerfire benchrest competition, you have to have the bolt out of the rifle before you can remove your rifle from the firing line. Many of those benchrest shooters use a holster to have a place to keep the bolt between relays.

For 3p and prone, the only time I remove a bolt is when I'm flying with my rifle in a hardsided case. I've had two stocks broken by the airlines, one wood and one aluminum...both times with a bolt in the action. That little extra pivot point is sometimes enough to crack a stock, even with an otherwise undamaged rifle case. Good luck getting the airline to replace your stock in this instance. I've never had a stock break when flying if I removed the bolt first.

Eric
Soupy44
Posts: 411
Joined: Thu Nov 27, 2008 5:37 pm
Location: Raleigh, NC

Post by Soupy44 »

A note from experience:

During the return trip from England for the Robert's Team - Pershing Team prone match in 2001, one person put her bolt in her carry on and they believed it was a firearm.

Might want to make sure to leave it in the case with the gun.
User avatar
Rutty
Posts: 263
Joined: Mon Oct 09, 2006 2:25 am
Location: Rutland, United Kingdom

Post by Rutty »

Soupy44 wrote:A note from experience:

During the return trip from England for the Robert's Team - Pershing Team prone match in 2001, one person put her bolt in her carry on and they believed it was a firearm.

Might want to make sure to leave it in the case with the gun.
No, they didn't believe it was a firearm, they correctly identified it as a firearm component which is an item prohibited in hand baggage. The purpose of the regulation is to prevent separate components being brought on board by a number of individuals and a improvised weapon being assembled in flight.

Rutty
Post Reply