TargetTalk

I would check with the site sponsor or International Shooters Service

I have a Mod. 1451 bolt that needs the striker spring replaced, my guess is I need to remove the cocking piece and guide bolt to accomplish this task. I have searched the Anschutz site and done several internet searches with no luck on instructions, only illustrated parts break downs.' Can some one ...

For minor adjustments left / right you can move the ball of your front foot while keeping the heal in place. For a right handed shooter, forward will move NPA left, back will move NPA right. I personally find this technique works best when I only need an inch or two adjustment, more than that I move...

What material are the spacer blocks under your cheek piece?
Photo looks like aluminum, if so replace some of the spacers with brass and you will add weight rapidly.

This is a topic no one wants to provide any information on. The best answer I have been given is it requires special tooling and is best left to experienced service technicians. Aggravating to not be able to find useful information for what should be a simple adjustment for someone that is reasonabl...

Overall length was my issue but it won't be come Monday.

Thanks for the information Dude

I have looked in the NRA International-rifle rules section 3.6 & 3.7 for any maximum length adjustment and do not see that aspect of adjustment addressed.
Is there a limit on but plate length elsewhere in the rules?


Thanks,

Dave

Thank you all for the information. We have fired the P70 from a gun vice and produced a 5 shot group that very nearly matches the original test target using standard Crossman pellets. We will be sending it to Pelkington for seals, tune up, and pellet testing this summer after the last of the local m...

Which version of the P700 are you shooting?
The universal version weights can be removed I am not sure about mounting provisions on the aluminum version with the weights removed.
My P70 has the dovetail machined into the barrel, might be the same on your P700 and just covered by the weights.

Dave

I found a very reasonable deal on a FWB P70 5 years old with no leaks or modifications, internally adjusted as it was from the factory, but the seller states the muzzle velocity is 400 FPS. Does this sound right for a 10 meter gun? I have searched the web and it seems 570 FPS is the current norm exc...