TargetTalk

Brian Zins uses a different grip than most shooters. According to reports it works well for people whose hands are to small for a traditional grip.
You may want to investigate that.

I have a KKM 1/32 twist barrel and shoot cast lead, swaged lead and jacketed bullets. I have found no issues.

I have the MatchDot. It weighs 4.8 oz. the 25Mm UltraDot weighs 3.9 oz. Since I only use the 4 MOA dot , if I had it to do again I would get the 25mm UltraDot. The dirrerence in weight of 1 oz doesn't seem like much but it makes a difference. With the MatchDot in place my Ruger MK II 5.5 inch target...

To: GBMaryland I am happy with my MCP Pistol and would get another. I am happy with Dr Nick’s business practices and the way I have been treated. I appreciate your support of MCP ....HOWEVER.....you come off like the PROPAGANDA BRANCH for MCP. The way that you report on MCP makes your reporting less...

If I were attempting to get the best accuracy, I would cut the lead angle so that the bullet was within a few thousands of an inch of engaging the lands when the round was chambered. I would also cut the chamber to minimum SAAMI standards. SAAMI standards have a plus and minus to them. I would make ...

I own an MCP model 92. It shoots very well. I believe the gun is capable of winning any EIC match. But I am just getting started in this field of endevour so take my word as you would any other stranger. As far as reliability I will recomend that people put several hundred rounds through an MCP 92 b...

Here is a picture which shows head space for a 45 ACP. Freepistol is on the money. Free Bore and lead angle can be cut with the same reamer as the chamber but some times a gun smith will use a chamber reamer that just cuts the chamber and then do the lead and free bore with a seperate throating ream...