TargetTalk

hi,
I have pardini kids which has 250 bar, I have one 6 L 300 bar cylinder filled up to 250 bar only using
norms as per EN-12021 standard dryness, dust and oil removal using Bauer TRIPLEX filter system P-21.

do u thing it destroy my Pardini kids 250 bar small pistol cylinder.

yours sincerely.

David Levene wrote: ↑Sun Sep 22, 2019 12:50 am 250 bar is over 3500psi.

I doubt whether any car or cycle tyre inflators will go much over 100psi (if that).

i was talking about those which are iinstalled at petrol pump and cycle vendors.( the big tank u might have seen)

hi,

I have one pardini cylinder, 250 bar can it be filled by the cycle shops( they got big tank) or petrol pump car inflator?

yours sincerley

David Levene wrote: ↑Fri Sep 13, 2019 4:24 am Email the serial number to Pardini and ask them?

thanks
where I can find the serial no on gun?

hi,
I have one second-hand pardini kid's who's cylinder says it is 2015 make. but some body said that cylender could be changed.

so please tell me is there any way to tell the correct year or make or model.

yours sincerley

Rover wrote: ↑Mon Sep 09, 2019 8:25 am Test them yourself; it will only take a couple of minutes.

if u try to do it, u will find, it needs good experience, which i do not have and all guns are old guns available at clubs.so I just can not be sure.
and I do not have the guns only local guns without such adjustment.

hi,
I am going to purchase a second-hand pardini kids, so pls tell me how should I check it.
and rate it.
one gun is 2015 model
other one is 2016 ,model with new cylender and new trigger like styer.

yours sincerely.

hi,
I noticed the top and bottom adjustment is there in syter lp 2 and pardini kids, and so i want to know how far one can go up and down or left and right. from the target

yours sincerley

what would be the price for me,
and if the cylinder is dated 2014 how come pistol is two years old.

yours sincerely

" an optimum grip angle; a high grip point (only a few millimeters under the barrel axis as permitted by ISSF regulation)" That sounds like someone has either mis-quoted Pardini, something has been lost in interpretation or they don't understand the rules. There is NO requirement under IS...

hi,

in Pardini kids manual, one thing I could not understand if anyone can make it clear by making a pen sketch would be helpfull.

" an optimum grip angle; a high grip point (only a few millimeters under the barrel axis as permitted by ISSF regulation)"

hi, I noticed styer lp 10 compact has got grip adjustment where with the help of four screws one can pivot the grip up to few angles, that is one can raise the barrel or lower the barrel from the normal position or any hack can be done. is there any adjustment available in pardini kids or any hack c...

hi,

I want to buy pardini kids/ styer lp 10 compact, please tell me if anyone is interested.

yours sincerely

william wrote: ↑Tue Aug 20, 2019 6:21 am Try this:

info@pardiniguns.com

that is email adrress , i have sent one email to them,but if some one knows , then please send me the grip which can be used with pardini kids.

Yes easy to do, but you will need the compensator as fitted to the LP2 to hold the front sight. I could not understand, I mean can I reduce the weight by removing the outer stabilizer(covering with holes vents on the barrel which is not present on lp 2) from the barrel of lp 10 companct or not? Yes...

hi,


Pardini kids has got one ambidextrous grip, can it be fitted with any other grip.

yours sincerely

Silvershooter wrote: ↑Sun Aug 18, 2019 8:06 am Yes easy to do, but you will need the compensator as fitted to the LP2 to hold the front sight.

I could not understand, I mean can I reduce the weight by removing the outer stabilizer(covering with holes vents on the barrel which is not present on lp 2) from the barrel of lp 10 companct or not?

hi,

can I remove that cover from lp 10 barrel to reduce the weight of the gun? which does not exit in the lp 2

yours sincerely

hi,
Please tell me the pros and cons of these two pistols.

yours sincerely.

i am going to buy a new grip which will be bigger than the current one, so i thought to ask .