TargetTalk

This sounds like an after market modification designed to shim up the back of the mount possibly to compensate for a scope that did not have enough verticle adjustment. My mount in original condition does not have this. If you don't need it, I would remove it. Sounds like something that would scrat...

"I was confused.. as what I have here is the genuine Hammerli scope mount, and the mystery continues. I had a dramatic change in the UltraDot red dot during a league firing a few weeks ago. I/we readjusted the scope to the X bullseye, and it may or may not have solved the problem so far. I don...

There are three basic ways to mount a scope to a Hammerli. The best and possibly the most common is to use a Hammerli/Knapp mount no longer produced but a good copy is sold by Larry's guns. http://www.larrysguns.com/Products/Scope-Mount--Hammerli-215__LGI-spc-215-spc-Mount.aspx The advantage of thi...

There are three basic ways to mount a scope to a Hammerli. The best and possibly the most common is to use a Hammerli/Knapp mount no longer produced but a good copy is sold by Larry's guns. http://www.larrysguns.com/Products/Scope-Mount--Hammerli-215__LGI-spc-215-spc-Mount.aspx The advantage of thi...

Does anyone have a proper method of setting up a scope mount for the Hammerli 208s, and sources for these? I have a UltraDot four, 30mm red dot scope.
Thanks...

Hello, and another Hammerli question. Is there any documentation on the serial numbers and date of manufacture of the Hammerli series semi automatic 208s or any of the Hammerli line pistols?
And where to look??

There was a seller listed here on Target talk selling the Bullseye 3 disk programs of "Mind over matter"... I may be interested... any leads??
EagleEyes,,,,

Hi lxvnrsw, I was afraid the simplicity would be lost in my explanation. Ok, it is simply a wooden dowel, that's been sanded down to loosely fit in the .45 bore. It is about 7" long, with a cute bumper glued onto the breech end and a sewing needle centrally sunk and glued on the muzzle end. I ...

Why not just buy a metric allen wrench set and a couple small screwdrivers? Cheaper and easier to get. A good tip..and worth considering. I was more or less going by the angles of the supplied tools tips, and what you may be suggesting is that those may be misleading. I just purchased the 208s with...

I am looking for the tools kit supplied originally with this series of Hammerli.
Can you point me to a location, or does one of the readers here have set for sale. Thanks.
2EagleEyes
BTW.. I am two days new here.