TargetTalk

I noticed it says you can also power it by a 24volt car battery , all the cars I know of are 12 volts.

I went back and looked in the question and answer section and someone noted that the description say 24 volt but the tag on the pump say 12 volt and does run on 12 volts
Thanks Aaron.

If It's like the 162Ei, there's a spring that sits between the rear sight and the frame of the gun. If the screw came all the way out the spring under the sight is probably just lay underneath the sight. There should also be some kind of small E clip on the screw to prevent the screw from coming all...

I used to buy those around 2010 or so before I got my first PCP air pistol and then started buying the RWS pellets. Not sure where they were made. They seemed ok, never did any testing on them. I don't see the wadcutter's around here anymore only see the pointed ones now.

Aaron

I ordered a cylinder from these guys back in April for my Sam10 air pistol. It took about 3-4 weeks but no problems. https://tec-hro.de/schiesssport/en/ I just emailed them at this address info@tec-hro.de
they promptly responded sending a pay-pal transfer envoice for payment.
Aaron

They are not interchangeable. The match gun treaded valve is slightly larger and of a courser tread. The match gun fill adapter slips right over the sam cylinder valve
Aaron. https://postimg.cc/34Ts7k9n

As stated, the titanium model had a titanium striker to speed up the lock time. These new strikers were failing so that idea was dropped. I was told the same thing from Morini, back in 2017 , so why is Champion choice advertising them this way: (As CM 162EI but in Titanium color and 3.7 g hammer fo...

E-mail sent
thanks Aaron

The first (and cheapest) thing I would try is a new striker spring. Just go to the hardware store and see if you can find something like it before doing anything else. I agree, I have an lP10E that had a broken striker spring. Every couple of months the velocity would drop off some. I would adjust ...

I though about picking up one of those last week Myself until I read this (especially the last paragraph) Being that the cylinders are dated 2012 that must be the year the gun was made? therider Post subject: Re: Matchguns feedback? PostPosted: Tue Feb 23, 2016 3:34 pm Offline Joined: Fri Nov 29, 20...

Is this maybe what you're talking about
https://www.tenrings.co.uk/tips-and-tricks/

As I read your post again I don't think this is what you're looking for. I think you are looking for the actual time the pellet goes down the barrel I remember seeing that somewhere before my self .

I remember reading this a while back http://www.targettalk.org/viewtopic.php?f=4&t=54122 The eighth post into this is a link from Chia to this message from Pilkguns I believe there is a little mix up in information here. To cover it all, 1: cylinders can be left full , empty or nearly empty, doe...

I can believe that
Hope he doesn't bash me for my decision

Get the black one, extensive machine rest tests prove that it outshoots the silver one. 10.9 ave. verses a 10.8999. :) That's not exactly what I was referring to when I asked the question. Anyway I ended up getting black LP10E really did like the looks of the silver as well. Besides it looks like Jo...

...and if you really start noticing the color, that means you are not paying attention in the front sight or SA. I was mainly refering to any possibility of external light from above reflecting off the silver gun up and onto the front sight interfering with your sight picture, but it looks like tha...

"Check with the experts"? I guess you couldn't find any so you came here? Sorry I could not resist being a smart ass. I may not know much about what gun to pick but I do know an expert when i read it (lol) Deadeyedick, any idea what the new one will be like ?, Im in the US, how long would...

Kind of what I was thinking but having never shot either one thought I'd check with the experts.
Thanks Aaron

I am looking to buy a lp10, I like to looks of the silver but wonder if there will be a difference in sight picture with the silver vs the black. ( will there be a difference with light refection with one vs the other ./ will there be a difference in sight picture between the Sliver and Black ) Than...

Here is a link to the bullseye forum that talks about the trigger adjustments with another link that takes you back to this forum with some nice pictures of the trigger http://www.bullseyeforum.net/t4234-pardini-sp-trigger-adjustment http://www.targettalk.org/viewtopic.php?t=19268&highlight=pard...

It's been a while since I changed mine. but I think you are going about it the right way. I had to apply a little heat to the area around screw 22 as it appeared to be locktited in place.

Looking through some of the posts and other infor I see the Free pistol
TOZ identified as TOZ-35, TOZ-35M, TO3-35, and TO3-35M
What's the differences between these guns, or are they one in the same.
Thanks Aaron