TargetTalk

To disassemble, push a pencil into the mag and press down the follower until you can remove the pin through the lower hole.

It sounds similar to a detailers clay one would get from an auto parts supply store.

Something like this:
http://www.meguiarsdirect.com/detail/MEG+G1001

Metal polish will put a shine on the metal, which you may or may not want.

They have a long history of making junk.

http://www.thehighroad.org/showthread.php?t=238332

Their airpistols are probably the best things they've ever made, but by the opinions of those who own them I wouldn't consider one based on their quality history.

Good luck to Mr. Khaidurov. His website has been parked with nothing on it for years. I hope he makes it. I hope it's imported to USA. I hope the price is reasonable. If it is, I'll buy one. European guns have been out of my price range for a long time. I can't afford to buy more AW93 magazines at $...

My experience was the Sport was not as good as the Super-Extra or Subsonic.

Gun pointing downrange for reference. The large spring goes over the drift pin from the right, so that it's captured by the sight frame and the right side of the sight. The two screws go into the holes in the sight frame and the ball bearings go over the screws. When the sight is put together with t...

Hämmerli recommends the use of felt pellets for cleaning.


From my manual:

"Every 500 shots or so, clean the barrel with a felt pellet soaked in BREAK FREE or some other top quality gun oil.

Deoil the bore by firing a few dry felt pellets."

Just checked my factory Rinks (the one in the picture looks like a custom job) and all of them are pretty much horizontal in the part above the hand. So don't start any rumours. The first picture is a modified Morini. The second is an un-modified non-custom Aw93 grip from Rink. Look at the images o...

The griffachse does correspond to the lines of lamination. Most Rink grips that I have seen, have this downward curve of the grip, therefore I assume that most Rink grips are in fact illegal by the standards of the rules. Unless I am mistaken (which I very well may be), years ago the rules had the c...

Thank you Spencer.

Now, on the basis of the above diagram, why would this un-modified Rink grip be legal if the angle is slanting downward?

Is this grip mod to the top of the grip legal? http://i155.photobucket.com/albums/s283/octopus8/DSCF2525.jpg 8.16.0 says "The grip must not encircle the hand. Curved surfaces on the grips or frame, including the heel and/or thumb rest, in the longitudinal direction of the pistol are permitted.&...

Take a picture of how it goes back together and where the parts belong. Be careful so as to not scratch the sight mount area with the drift pin punch. There are some springs and ball bearings that can be confusing when putting it back together. Here's the essential part of Don Nygord's instructions ...

Eurastus wrote:Those cases are indeed sweet.

My German is not up to the task of trying to order one from that site, though.

Anything like that available in the States?

Mr. Rink speaks English also, so if you need to order from there, just email him.

You might try Greg Derr. I'm sure he knows the pistol.
He's in Marshfield.

www.derrprecision.com

Here's the AW93 weight. http://i155.photobucket.com/albums/s283/octopus8/DSCF2290.jpg http://i155.photobucket.com/albums/s283/octopus8/DSCF2284.jpg http://i155.photobucket.com/albums/s283/octopus8/DSCF2291.jpg The larger absorber piston is hollow, with a guide rod in the center. the guide rod aligns...

My guess on Feinwerkbau's trigger is they will just shorten the trigger bar notch (part #27), so that the first stage travel can be adjusted away. The first stage spring maybe would need to be made longer. That way, the trigger can be adjusted as one or two stage. http://www.pilkguns.com/tenp/DSC044...

Tilman,

How is the slide removed?
Do both front and rear sights need to be removed for the mount?

How do you clean your gun?

Not the same.
Very different.

viewtopic.php?t=15394&highlight=khr30

alex c. wrote: But the basic layout of the two pistols are very similar, hammers fall from above, firing pin strikes at an angle to dry fire without a plug,

My 93 hammer falls from below the barrel.

Pilkguns has an article on their site with good info by Anatoliy Piddubnyy. http://www.pilkguns.com/pistolcoaching.shtml Here's an excerpt— By Anatoliy Piddubnyy FIXING THE WRIST - TRAINING WITHOUT A WEAPON This is the weakest point of all pistol shooter. The sooner the beginner, with the help of hi...