TargetTalk

PeeWeeDaddy wrote: ↑Sun Mar 30, 2025 4:52 pm
I cannot get the parts and if it cannot be welded I will probably part it out.

Just get a good gunsmith to mill that broken part with reinforced steel and you're back in business.

KevinW, Yes, I have a new seal kit in hand and am looking forward to opening the gun up. Foest.eu has been a good source for seal kits. So your experience was that you first received your used FWB80 it was unlocking abruptly during cocking then locking again at the end of the cocking stroke, but th...

Question for the Feinwerkbau cognescenti - Is it normal, or within range of normal function, for the sledge/action to intermittently unlock during the cocking sequence? For example - after firing, I nudge the sledge/action forward so it locks in battery, then pull the cocking lever back to cock and...

Can you tell us which air rifle you wanted to buy??

Plus, there is no way to dry fire it. You don't want a pistol you can't dry fire It is possible to dry fire the pistol by just unlatching the lever and slightly pushing it forward to cock the sear without pre compressing the air. Like I said, repeatedly doing so will damage the plastic housing of t...

I found this Air Venturi V10 for around 380cad You're from Canada? Had a Gamo compact, the equivalent to the Air Venturi V10. It's a pistol that is fine to "plink" around the house. The plastic used in the frame of the pistol that houses the firing mechanism is brittle, and will break wit...

Guessing hers shoots them faster than a full length K12? Longer barrels on CO2/PCP airguns produce increased muzzle velocity and energy transfer. It takes more time for the pressurized air to accelerate the pellet down the barrel which generates higher velocities. Since you are talking about airpis...

The FWB 65 with a single spring, produces around 475 fps with a 7.0 grain pellet, while the two spring version goes up to 525 fps.

I think oem single springs are compatible within the 65/80/90 series.

The screw is misaligned and does not look properly seated, that's the reason it still wobbles. Whoever did this fix is definately not an "airgun smith", but a "franken smith" that doesn't know what he's doing...

For a 20 year old air pistol, does the cylinder still compress, holds air, and fires normally?

If it still functions fine and it comes with the spare seals, you could easily ask $500-$600 more or less.

Probably H&N pellets, contact Walther and ask them:

https://carl-walther.com/sport/company/contact

E-Mail: info@carl-walther.de

From what I heard, old barrels were rifled in-house. Now, all their new barrels are sourced from lothar walther.

I have no doubt that FWB barrels are legendary, made to the highest degree of quality and accuracy, on par with Walther.

The reasoning is that you can add it to sell the pistols for a higher price... An awful lot of top level shooters are still competing with Morini 162EI's, so I'm not convinced it's anything but a marketing gimmick. I wouldn't say it's a gimmick, the more innovative things you put into a device, the...

Dirty, economical pellets can be cleaned very easily. Use a plastic container with some warm water and liquid soap. Move and swirl the pellets around with your fingers. When the lead sediments settles on the bottom, pass the pellets over to a strainer and flush the soap off with running water. Sprea...

loadcc wrote: ↑Mon Jan 08, 2024 10:58 pmhaha, no heaven ,no hell ,only situation you have to face to....

Watch out grasshopper, what goes around comes around, karma can come back and bite you in the arse..

No need to envy gun owners. I know gun laws in China are very strict, but if you love the shooting sports, you should contact the chinese shooting association. They can give you all the information you need, hopefully you'll find a coach/mentor to improve your skills.

When my AmStaff sees my pistols or rifles, he automatically goes into hiding mode. With the new year's celebration and the neighbors setting off fireworks, the dog didn't bark, hide, nor was he scared of the popping and exploding sounds.

Back in the 80's FWB made this technological feat to prove that their airguns are pinpoint accurate, even with a twisted barrel. Supposedly, only 2 or 3 prototypes were made, none for commercial sale. Certainly a good investment that will increase in value over time.

Ask Ernst Franz Huber, he's the chief technician at Steyr Sport.

https://steyr-sport.com/en/contact/team

Ernst Franz Huber
+43 / (0)7435 / 202 59 - 78
e.huber@steyr-sport.com

For those looking to use o-rings as a less expensive option for breech seals: https://www.airgunnation.com/threads/izh-46m-transfer-port-o-ring-solution.1284693/ If you're not using the pistol for a long time, always lubricate the piston seal and dry fire before guarding to prevent dry rotted seals.