TargetTalk

The oval one is the good one

Check the valve stem if it is not conical in back that’s your problem we had a few cp3 with this issue once we installed conical stems issue solved
Screen Shot 2018-08-24 at 11.28.09 AM.png

Check the valve stem if it is not conical in back that’s your problem we had a few cp3 with this issue once we installed conical stems issue solved

sear part# 1856.143.1 for fwb c5 can someone make one company fwb does not have in stock.

part 1856.143.1 sear
for fwb c5 or can someone make one company fwb does not have in stock
https://popgun.ru/files/g/96/orig/17933274.jpg

Orange color in diagram

by further investigation I found out that the s spring is a broken part of 1856.149.3 known as leg spring

i took apart c5 co2 pistol when putting it together I have an s spring left over which i cannot find in C5 pistol diagram does anyone know if it belongs to this pistol and were it goes.I found a russian post that has pictures of the S spring put i do not see this spring in parts list https://popgun....

how can i adjust trigger weight for first stage and second stage what screws do i turn
"by turning screw 11 trigger point weight can be changed" is what i see in manual , does screw 11 change weight of second stage?

http://www.carlwalther.com/
sent me two valve stems total $95.00 with shiping issue is now resolved all 5 pistols good as new

replaced valve stems with part #266 conical ones all 5 pistols work excellent.four out of five of our pistols had flat valve stems just like ones from cp200 that was our issue

thanks earl has them @ $35 apiece plus$15-$25 for shiping i ordered two of them,
I cannot understand why four of our five CP@ pistols came with wrong valve stems wich were flat not conicaly shaped

walther CP3 valve stem needed part #266 would anyone know were I can find two of them

Four out of five of our pistols have valve stems tha look like they are frop cp200 models they are not conical they are flat by trying the conical one on the rest of pistols made them work correctly will order new valve stems and post my findings. i found two conical valve stems and used them on two...

Steyr Evo10E Rink grip will it fit on steyr LP1?

my Margolin's.22 pistol trigger weight is 2 kilos how can I reduce to 1 kilo

i received new piston lever today from eaacorp replaced it the gun functions corectly now

i think i found problem piston bar was welded a while back the top part had weld spurs i filed it down and smoothed it out now pump lever locks after i fuly pump it.I aslo placed order fo a new piston bar at eaacorp it looks like theyhaveparts for izh46m now

it started doing this on my last shot at our shooting range i had shot more than 150 pellets that day with no problems on last shot it started acting up,as i pulled lever down and the air was compressed as i tried to close lever in place i did notice i had to apply more pressure than usual as it was...

I pull pumping lever to compress air for izh46m as I try to fully close lever it does not lock ,it kicks back if I press it shut and hold it in place gun fires ok has any experienced this problem .I changed piston seal and problem still exist

we worked with a few of these pistols in past in Greece Crete Chania shooting range ,we found out the hard way when working with these pistols you must put them in dry fire position before replacing parts or seals in order for gun to function corectly after replacing parts conect co2 cylinder gun sh...