TargetTalk

I'm not sure if the set-up is a rugged as Larry's - but I can notice the weight difference. If I were 2-handing it, I'd go back to the LGI mount for sure. But for now my recipe of one mount works out fine for me.

Were you shooting the 100's at 25 years?

I'm also amazed at how good the LGI buffers are with cleaning solvents. They seem pretty much impervious to it - unlike the stock red ones, which I think was most of the problem. The more I cleaned it, the worse it got. Put another 150 rounds through it yesterday - not a single problem. Great little...

I believe removing the trigger group is required to completely remove the slide assembly. I break it down to the trigger group, slide assembly, and barrel/grip, every time I clean it. I've noticed blow back deposits near the upper end of the magazine slot, that eventually creep along the upper surfa...

I've used a single ring and so far it's worked fine. The match dot is light enough that it seems to be stable and secure with a single ring on the front barrel. I did use a little of the "red" thread locker by Loctite on the three screws - removable, but makes the fastener slightly more ro...

I believe Rink-Formgriffe makes grips for MKII & MKIII - You can order them through Larry's. They make really good grips.

I put a slight amount of the red loctite thread locker on the mount screws - seems pretty good so far. The great part is that you can completely strip everything out (buffer, bolt, etc) to clean without even touching the mount! The height is actually growing on me - but I will see how low I can get ...

I recently upgraded to the Konus 65mm 15-45x and I'm very pleased with it's performance at 25-50 yds. I picked it because it had the narrowest FOV I could find for the buck. Easily zooms into the black. Very clear and bright optics, reasonably lightweight and an apparently "quasi" ruggediz...

Good deal! I've got the LGI Mount - it works fine and feels stable, but it doesn't stop me from tinkering around a little bit. This idea I got from Greg Derr's website. It allows you to strip (pull out the buffer) without touching the sight. Definitely more delicate then Larry's - but you get the id...

I'm a big Benelli .32 fan too (so far). It's a snap to disassemble and clean. I think this 'buffer thing" is a common problem (I've read about it several times before), replacements are fairly cheap (so get 2 - part number is 065P) but I read today on Bullseye-L that Larry may have available a ...

No expert here - but here are my observations with the MP90S .32SWL with the MatchDot. So far I've only used the Fiocchi 32LA (400 rnds so far) and have had no problems during rapid fire. The LGI mount worked OK, but I could feel "something hitting something" during ejection. Larry is prob...