TargetTalk

Hi All,
I'm very interested to hear from anyone that has had some hands on time with the EVO 10 E SX
Worthwhile training tool or gimmick?
EVO10E and LP10E can be upgraded with SX trigger and electronics but LP10E will also need an new grip, will be interesting to see prices.
Thanks

Thank you Doug, very much appreciated!

Hi Doug, any update on the files going up on thingiverse please?
Unit has arrived and keen on the LP10 and morini files in particular if possible please.

I have a 2009 LP10E, I recently thought I had faulty regulator due to velocity inconsistency. I was researching and psyching myself up to service the regulator, but turned out to be the loading port and bolt face o-rings, replaced those and velocity is stable again. Regulator is still going strong. ...

Steyr has just released their EVO10E-SX which features a bluetooth dongle that adds trigger force and stability data via an app. Awaiting the reviews…
https://www.steyr-sport.com/en/air-pis ... -e-compact

https://m.youtube.com/watch?v=jILNbyMrtRg

Are there any options available for replacement cylinders to suit the 480K2 ?

Thanks Gwhite, another great resource.

Thank you for sharing Gwhite, following with interest.
If not already there, is it possible to emboss the model number somewhere on the adaptor as part of the design?

If your original faulty board is green, then a replacement blue board will not work with your trigger unit.
If your original faulty board is red or blue, then a replacement blue board should be fine.
I am sure Steyr Service can advise you best based on serial number.

Hi srgfctG Please read this thread, it may help you. https://www.targettalk.org/viewtopic.php?p=331679#p331679 In my case it turned out to be some failing components on the electronic board that caused the problem. I was able to repair the board by replacing those parts. If you have the same issue o...

Thanks for the suggestions, and thank you m1963 for the offer, I will pm you.

Hi All, I am after some help please. I have an old Steyr air pistol case that has seen better days. Can anyone recommend an adhesive they have used to sucessfully re-attach the foam cut out to the green fabric backing. The original stuff seems to be some sort of clear hot melt glue that remains flex...

This board ended up with me, happy to say it is working again. The local prices the owner said he was being quoted for a replacement board were crazy and importing a board from Europe has its risks (I have a parcel from Buinger missing for a month now, lost by Aus Post) so there was nothing to lose ...

The same thing happened to me on the red version of the LP10E board, but not as bad as the one you have. Mine would come on but solenoid strike became weaker and weaker after a few shots as the faulty component got hotter until it would no longer fire. It is actually a 100uF-16V low ESR Capacitor no...

I gave it back to the student, and it was shooting about 3 inches higher. That seemed odd, but that could be from fixing leakage at the breech seals, although that seemed like a very big elevation difference. He re-zeroed, and shot a nice group. He took a break, and it was suddenly shooting very lo...

Even if the O-ring is "new".... Thank you, I'll give that a try. .... I'm also going to assemble a pressure test gauge so I can verify the front screw setting if I need to take that section apart.... I'd be very Interested to follow your progress on this if you have the time to post about...

If you wanted to go down a deep rabbit hole with Steyr regulators there is some great information at https://shooting-the-breeze.com/threads/steyr-regulator-a-before-and-after.41076/ where they have polished the seal on top of the piston to eliminate creep and improve recovery/consistency etc. These...

Sounds like you have pretty much tried everything but just in case, since you are only at 5m have you adjusted the position of the device to bring it as close as possible to the sight line and/or used the brass screws on the mount to minimise parallax error? I found that when in calibration mode I n...

Also worth updating to the latest software and firmware if you haven't already (go to About tab in Scatt Basic software). I found I did not need as much light on the target after the update. I'm also thinking of making one of these Scatt light box LB-01 side photo using cheap strip LED's with a dimm...

JamesHH wrote:Has anyone tried scatt with a target on a TV or monitor?

Yes, the animated target used in my review video (link on previous page) was displayed on a standard LCD monitor, both devices were able to detect the target no problems.