TargetTalk

I finally remembered to take pictures of the string board-extraction loop I have been putting on our Morinis. The college team I help coach has six 162EI's, and every time I work on one, I add the string if it doesn't have one. The string is just one from the repair tags we have lots of. It's about...

One problem with the 162EI is that a fair amount of force can often be required to change the batteries, which can flex the board. We have some with Rink grips, and I've had to whittle the inner compartment so that you can get the board out without a scary amount of force. The spring clips that hol...

Sounds like the micro switch is set too fine. Check that the switch plate is tight to frame. Have you checked the micro switch screw adjustment (0.8mm) on top of switch plate. Make sure that you have about 80g weight on second stage, enough to re-set the trigger. Back off switch screw 1 turn, then ...

I have a Morini 162EI that started acting up. At first when the trigger was pulled it would fire a shot and the solenoid would click as if I had squeezed the trigger twice. Sometimes during dry firing it would shoot 2-4 shots with a single trigger pull. It now will no longer fire at all when using t...