TargetTalk

Here is my two cents. The best grip would be yourself modifying your own grip as you are the only one knows your own feeling the best. And from time to time, you may want to keep modifying it again and again to suit your needs as your skill is changing, your understanding to the air pistol shooting ...

BTW, I shot 90 rounds with my TOZ and put 10 rounds through my friends CZ rifle today. Those cleaned Eleys worked just fine.

Thanks master. I’ll keep an eye on the leading in the bore.
Yeah I use BoreTech Rimfire Blend and VFG felt for cleaning my .22.

Learnt. Thanks Stan.
GWhite was right. It’s just some lube oxide. Very easy to wipe off.

some result with dry wipe.

Do I need to apply some lube like Liqui Moly the synthetic oil after the wipe?

Thank you all for the replies. The cleaning job turns out much easier and safer. Great~~~

Does anyone have experience with cleaning oxidised ammo?
I've read a couple threads and found vinegar or vinegar mixed with salt can do the magic? But still want to double check before I do it as it's my first time dealing with oxidised ammo.
Thanks in advance.

Checked the manual and my MG2, yeah it has #2108&2109 on the left side. I just simply didn’t see it lol. So I dug in from the right side. lol

Oh well if it’s supposed to be a part of the pistol, I’ll ask the seller. I’m gonna need to find that part number on my manual. Thanks GWhite. Thumb up.

Snap! You are absolutely expert! I’ve just done that. I used a nylon screw only but left the end on. So I had to carve a shallow channel on the inside of the grip to give the end of the nylon screw a bit space. I found the shifting issue a couple of days ago while training. I shot 100 rounds but the...

here is a photo showing the screw I used to stop the outer screw spinning.

I see what you mean rmca.
I’ve also got feedback from morini that they are still producing grips for TOZ. But just a little bit pricy. So yeah I’ll probably go for a Rink then.

Good news~ @ GWhite. My theory worked. I used a steel screw to stop the outer screw spinning while doing the inner screw. I tried nylon screw first but it’s not strong enough to stop the spin. For the steel screw I was really careful to put the pressure in as you said it may chew up the threads. Now...

Does anyone know where to buy morini grip for TOZ? Looking for small right handed. Thanks.

Anyone knows where to buy morini grips for TOZ-35? Only found euroshooting has it but only medium and large size. I need small size.

Okay I’ll be careful. Thanks.
I’ll try to find some nylon screw first. Is it M3?

Yeah will do.
I’ve also found a small threaded hole on the side of the outer screw that can see through the outer screw. So I’m thinking of putting a screw into that hole to stop the outer screw spinning when doing the inner screw. Not sure if it’s gonna work. But I’ll give it a try first.

Wow~ can’t thank you enough. that’s really good. I’ll read it through before I do the operation lol

Seems like a big operation that I’ve never done on a pistol LOL. I’ll try to be careful.
Thanks v v much for the instruction with all the detailed parts number.