TargetTalk

I am not sure on the W-01 model. Is this the USB model with the frame?

If it is showing where you are aiming then I would look at the sensitivity when you are calibrating. There should be a few different settings and it may need to be more sensitive.

What is your focus on? In practice are you focusing on the fundamentals, process and technique? What about in competition? I believe that you are results oriented when in competition and it is hindering you. You say "when it doesn't matter" in practice, why doesn't it matter? Is it the sco...

I am bringing up an old thread here, does anyone have a design for these?

Much appreciated!

Is there documentation or a thread on the effects of barrel weights on an air pistol?

I saw a thread a while back on short barrel vs. long barrel but looking at weights on a standard/long barrel.

Thanks!

Lake

Sent you a PM.

Thanks,

Lake

Check out: https://sportshootingdepot.com/product/cm-84e/

David is a good guy.

I appreciate the responses. David's number 3 was a bit tricky as the screw and ball bearings had to be pushed with a bit of force and the correct angle to click in there. I found that using the Morini screw driver to apply pressure seemed to set it in there smoothly. I think I have it all reassemble...

I have a Morini 200EI. After some travel, it looks like the elevation screw came loose and out of the rear sight. I am able to screw it back in but it doesn't sit right. It has two ball bearings, I believe these click into the spaces the rear sight but wanted to confirm. Has anyone reassembled one o...

I tried a few different screws and put them on the opposite sides and it seems to come together. I will take it through some of the paces then probably hot glue it. The molding compound for shaping will help keep it together as well.

It is all coming together, thank you everyone for the help!

Thanks for the insight.

The Toz is snug inside the grip. It seems like the grip sides want to separate. I am going to work with different screws and see if I can get a good fit.

I have a TOZ 35M and fitted the aftermarket Morini Grips on there. It look a little bit of work as I read it would on the advice from the forum. The grip sides line up and click in place with the screws. The screw holes on the grip are close to the holes on the frame but not quite there to attach th...

Jhmartin,

7.4.1.2 states: "The action, barrel and stock may not be exchanged, except that a detachable butt-stock may be exchanged."

I believe that this was the point agreed upon Agreed upon by who or is it whom and when? Curious on the who/whom was (credentials) and when the Star Chamber met. Good questions, I do not have the answers. My point was to clarify the original post on here as it was stated that "anyone wanting t...

The additional quarantine guidelines are under the section for people who have the religious and medical exemptions, not for people with the vaccine. With the vaccine requirements for the Olympic Training Center, I believe that this was the point agreed upon to allow those without the vaccine a chan...

If you are in the US: https://www.ishootconsulting.com/store-suits-capapie This should help get you started. Feel free to reach out with any questions. Prices are the same by vendor in the US. The most important part for a custom suit is the measurements. A suit cannot be ordered directly from the m...

I have purchased from David at Sport Shooting Depot and spoken to him on the phone several times. He is a pistol shooter and pretty knowledgeable about his products. Great and smooth transactions so far.

I would be interested in seeing pictures of the Rink on the CM200 EI. I was looking at getting one for mine.

Are you asking if the steel cylinder was a better choice than an aluminum one?

Thanks Alex!