TargetTalk

Quick update.

I shot with the SCATT target frame at 10m with an airpistol target / gopro cam and pellet catcher behind. One I shifted the projected impact to the actual, it was right on.

Pretty neat actually and worth the messing around

I have a GSP Expert (.22 & .32) SSP-E and SP-RF... I sold the GSP .32 conversion as it was too heavy and had bought the SSP-E as my main 22 pistol. ( I shoot Rink grips on all) - I never had a problem with the SSP-E.- very light and many weights to tinker with inc flapper weight but struggled a ...

I cracked and bought a SCATT. I am not an expert at interpreting the traces but simply try to 'shoot the furball' as it traces where you are holding and I want to place the shot where I am aiming. If the line zips off as you press the trigger something is going wrong (and it will give you the x,y co...

After struggling a bit with Trailboss (not many powders around here) I bumped into a couple of lbs of Titegroup and ran them through QuickLoad and tried 4.3gr behind 200grLSWC. TB load predicted to be 600fps (the occasional fail-to-eject) but not terminal with a 290 National Match. The TG load is pr...

Hey Dave - are you still producing Pardini barrels? I have an HP that needs attention.

I saw a post saying that the pistol 'keyholed' - I has a brick of very bad ammo (so bad it was replaced for free) and the effect was turning the pistol into a smoothbore via severe leading. The pistol keyholed at 10m. Cleaned the barrel - back to normal. I am struggling with a red dot on a Pardini S...

Hi ghillieman, Right on - I have a 2700 at the weekend and was shooting last night - and had the same problem with the Starline brass - had a jam and there was the dent on the shoulder of the feeding round. However - I forgot to 'tap' the magazine to seat all the rounds (which I did at the last 2700...

Hmmmmm, I was quite worried about the pistol jamming and so I bought 300 unfired Starline cases and pressed them up (4gr Trailboss, 200gr LSWC). Not a jam - however a couple of times for the last round, the case had not fully ejected (but was out of the chamber). I had kept the previous cases that h...

Thanks ghillieman - I was concentrating on the fired case - not the one below and as I write - I did make a slight change to the OAL as I made sure I was crimping the shoulder of the bullet (so it stands slightly proud of the case). I will be shooting on Friday and will report back. The problem is I...

Ugh! I am having extractor problems with my GT6-II-45. 200 gr (Penn LSWC) and 4gr Trailboss (regular pistol powders are very hard to find...) However it is accurate and used to work perfectly. Now I am getting extractor fails and partially ejected cases jamming the slide - so much so that I am going...