TargetTalk

Greetings,

Is it marked "Gil Hebard Guns" on the rear objective?

Cheers,

Dave

Greetings,

I have tested both at 50 yards and they shot well under 2".

Bear in mind, that the ammo I tested came from a past Olympic competitor.

Each lot of ammo will group differently.

Cheers,

Dave

Greetings _J_

Have you contacted SAKO directly?

I had a question on an old rifle and they did reply with the exact information I needed.

Cheers,

Dave

Greetings,

Unable to text you. System says your phone is not wireless?

Cheers,

Dave

Grrrreetings Mistah Match Director,

Are you referring to an NRA Precision Pistol or NRA International Sectional?

Cheers,

Dave

Greetings All,

"Two snaps and a twist" for Gwhite.

A very detailed document that will come to the aid of many Air Pistol shooters.

This sort endeavor is what I enjoy about shooting. The willingness to help others without expectation of reward.

Cheers,

Dave

Greetings,

Try Pure Lanolin or Lee Liquid Alox.

Wet your fingers and spin the bullet to recoat.

I did this a while back. Yes, time consuming; but, better than tossing the ammo in the trash.

Use it for Training.

Cheers,

Dave

Greetings,

GSP500 2864959

SP20 2743186

They "look" the same; but, I suspect not interchangeable.

Cheers,

Dave

Greetings,

A rather high end pistol for the average "Cowboy/Plinker".

Perhaps training for the Running Target event, if it still exists.

Cheers,

Dave

Greetings,

I have a Walther CP-3 (CO2) and the instructions say to keep a charged cylinder attached when not in use.

Cheers,

Dave

Greetings, I have several sizing dies I honed for the 32 Long and 32 ACP loading process. Different bullet diameters from 0.311" thru 0.316". Brass varies in capacity and wall thickness among the various brands. I select the die based on the bullet/brass being used. i.e. If the loaded cart...

HN.314.0001.jpeg Greetings, Most of the Euro-Guns have 0.314" groove diameter barrels with 1:18 3/4" twist. You can get three inch groups at 50 yards with GOOD BULLETS. The best I have tested are the H&N 100 grain Greased HBWC. 1.70 grain of Bullseye works well. The test target is a P...

Greetings,

Unique DES/VO is one.

There were two other Unique 22 short guns that I cannot recall.

Cheers,

Dave

Greetings, The Feinwerkbau website lists the pistol as a CO2 gun. Here is a link to the Owners Manual. https://www.feinwerkbau.de/en/service/downloads/technical-information/manuals?file=files/feinwerkbau/downloads/bedienungsanleitungen/luftpistolen/BA_LP_Mod%20C10.pdf I have a Walther CO2 pistol and...

Greetings, Take a box and weigh each cartridge. There is somewhere near 2.0 grains of powder, if I recall. Then take the "light" ones and test fire them. Perhaps a call to the Eley distributor and ask about replacement? Or, you could do like Western Cartridge did in the 1960's with a bad l...

Greetings, I have several moulds that are bevel base and flat base. I have recorded X-ring groups at 50 yards with both designs at 50 yards with a mechanical rest. The important factor is the quality of the bullet. If you buy "commercial cast" once they are sized/greased it is difficult, i...

Greetings,

Contact Neal Stepp as ISS Shooting in Fort Worth.

His agent has cut several lenses for me.

Cheers,

Dave

Greetings, Buy a used Air Pistol. The type that has a lever to compress the air. Feinwerkbau 65 comes to mind. There are also offering from Pardini. Even a Baikal IZH-46. Avoid the ones that require charging with SCUBA or CO2 tanks for now. Then buy some quality pellets and start shooting. It's only...

Greetings, Interesting. I shot in a Portland, Oregon match last Saturday and Mel Makin, 2 Gold & 1 Silver medal recipient, was shooting to the right of me. During lunch, we were talking about ammunition for 22lr auto-loading pistols. He mentioned that the new TENEX does not shoot as well as the ...

Greetings,

The recoil springs are different.

The 32 spring has larger diameter wire and is shorter than the 22 spring.

Cheers,

Dave