TargetTalk

Hi, If you don`t want or need the effect of the compensator, then why not just at 3d-printed tube on which you can fit the front sight.

I got the B1 compensator and printed a riser for the sight, works perfect.

regards from Denmark

Keld

I finally got time to solve the problem With a chisel? I removed a little bit of wood including half the hole. Afterwards the grip still needed some fiddling to get all the screws in place. Not a big deal after all, but must admit that I`m not impressed with the quality and fit. Of course I can´t te...

Wow, that's a fast reply;o) That's also my first thought, but... If I remove the wood the lever will hit the screw instead. Could probably remove some material on the lever without weakening it too much? Also wondering if the problem is in the upper part of the lever, meaning if the contact points o...

Hi folks. Just bought myself a second hand Morini grip to replace an original grip i bad shape. but the fit of the Morini grip is far from perfect, actually the pistol won´t fire, when fitted. Found out after loosing my hair, that there is not enough room for the cocking lever to move all the way fo...

Thanks for your quick advices. Will try to get a S&W spring. Btw, seems that the advice with cocking the right way also had a positive effect.

Cheers

Hi guys. My Toz 35 m occassionally does not always go bang, but click. It does not help to just set the trigger a second time. I need to cock it to make it go bang again. There is only a very light strike on the case. The firing pin seems to be OK(I hope, because it will probably be hard to find) I ...

Hello, time again for questions..... My FAS CF 603, which has worked flawlessly since I got it almost a year ago, has now developed a bad habit with malfunctions when clambering the round, it hits the edge of the chamber at the 12 o'clock position and only round no. 4 and 5. I think the magasines ar...

I think I‘m able to imagine what it feels like, sounds interesting.

Do you think, that my gun will be capable of such adjustment and do you know which way to turn the screw to get there?
Thanks,
Keld

Hello. I‘be recently bought a FAS 607 as replacement for my Domino, which needs some gunsmithing, which will exceed the guns value, to be up to date. Lovely gun, though. With the 607 I‘be have problems with calling the shots and getting the same feel and results. I have been adjusting the trigger to...

Hi, you could try http://www.Skyttebutikken.dk. They used to sell ksp200 and I believe they still have some spares left. I got my parts about 1/2 year ago.

It is in Denmark and I will be glad to help you if you get into trouble with the language:-)
Good luck
Keld

Hi guys. I've been using some putty called "cernit", which need to be baked in a owen at 120° C in 20 minutes to harden. It is used for a lot for hobby things and is not poisenous to handle or expose to your skin for long periods of time, which I suspect some materials for the industry mig...

That´s also my first thought, will try to get new sealings somewhere. I would like to change the sealings myself and have just removed the grip. I can actually hear the air escaping in the area, where the cylinder is attached to the frame. What to do next? I only have the original drawing with spare...

Hello guys. I´m the happy owner of an ancient Morini 162 E airpistol with fixed cylinder, no gauge, but the grip fits me fine and the electronics is working without exeptions. I´ve had it for 14 years, paid 600$ incl. an airpump, so Price level seems lower in Denmark than the US. But now it is leaki...