TargetTalk

we had close to a dozen shipped to here in Hong Kong , we all tried it , I dont want to say ..... , eventually , we all went back to the original trigger.

Lately , I have these questions on the captioned : I am shooting in the following way : Lowering from top of the black at 12 o'clock , I will start preloading on the trigger , gradually increase pressure on the trigger , keeping a good sight picture , until I land at the zone below the black at 6 o'...

Immediately after I posted the topic , I went into the following experiment : firstly , I increased the trigger weight on the 2nd stage ; while settling in the aiming zone , I loaded into the 2nd stage , keeping a good sight picture (since there is no perfect one) , I kept the pressure on the trigge...

Lately , this old question came up again : in the aiming area below the 6 , split second prior to release , aiming comes first or triggering comes first ? Since all of us know that our mind cannot do 2 things at the one time , the shifting of either of the these 2 could result a off-center shot. Wou...

Hi , switching to shoot a Morini 162ei , feel that the the volumn hold of the factory grip is a bit too bulky , seems too much to grind out though , wondering if a Rink for Morini of the same size is smaller than the factory's ; which they do in the Steyr grips. Appreciate all inputs.

Lately , I have come across this subject : at the below 6 aiming zone - the last seconds before the release , one should put his full focus at the front sight - (some shooters have been exclaiming FRONT SIGHT ONLY , FRONT SIGHT ONLY) , or put his full focus on the trigger execution - (these shooters...

BobGee wrote:Its over US$30 to send to Oz...

Bob

I am paying the same - shipping it to Hong Kong , so I collected an order of 4 copies , so to share the shipping cost.

Brian , I have been looking after them on my 3 LP10s , keep rubbing off the rust & oiling them. What's wrong to see where to get those stainless steel weights ~! Wow, you have enough backup guns in case one should fail during a match! Have you thought about electroplating the weights with nicke...

Brian , I have been looking after them on my 3 LP10s , keep rubbing off the rust & oiling them. What's wrong to see where to get those stainless steel weights ~!

I want to purchase those stainless steel shroud weights used by some of the competitors that I saw on ISSF TV ; those provided by the factory rust so easily ! Any idea on where to get them ? Appreciate.

The venue you can practice : JJ Sports http://www.jjsports.com.tw/booking.htm , enclosed is a map & means of transportation. It is on the 6th floor. 10m air pistols & rifles , charges nt$250 (us$8) for 25 shots , 1 target paper , Morini 162ei. Problem is : nobody speaks English there. Incide...

Zeddsded wrote:One thing to watch for with the Rink grip is its width. My LP10E failed a dimension check and I had to do a serious amount of power sanding to get it within tolerance.

Best check yours before going to a competition.

Width at where ? I had no problem going through a equipment check ?

I agree with Leon. Yet , the support plank at the base is a bit short on the Rink , modification might be needed.

Trying on the Rink from your college team will answer my opinion on the fit. I think you will like it. Today , I put the Rink on the LP10 , with adjustment on the mid finger & overhang , it felt good.

Removing or whittling the metal plate , might create some woobling , pls be careful. Thinning the wood in the web would help , but a small amount , do it carefully , that area is thin. Some people totally take off the screws at the rear.

I have the exact same problem & experience with my short trigger finger , & have been struggling with this problem for almost 2 years. I shoot Steyr 10 & 10E. In late last nov , I bought 2 rink grips , I received them almost mid feb. No to mention further fitting the grip ; when compared...

"Usually air rifles "like" heavier pellets, while pistols tend to prefer the lighter ones." Would there be damages made to the pistol , if I used air rifle pellets in shooting pistol ?

On the newly received Rink grip , used on the Steyr LP10e for 2 weeks already , I have come to this question : may be due to its lighter color , the sweat left on the grip is becoming rather noticeable , not to mention its affecting the firmness of the hold , I would appreciate your inputs on how to...

I read in the first post : .... "Next question - assuming palm shelf, thumb rest and the top overhang are fixed..." , I was simply interested to know what are the rules for overhang .....? Thank you.

Hi , reading your posts , would very much like to read the regulations for the overhang at the front , I don't seem to find it in the issf rules , thanks for your advice , ron.