TargetTalk

Hi, My Pardini K10 is doing something that I suspect is not normal. When I leave my air cylinder screwed in a few days/weeks, it slowly losses air until empty. If I cock and then unscrew my air cylinder some seconds later (15 to 60 seconds later) it looses the air stored in the pistol through the re...

Hi,

This might seem odd, but does anyone have the instruction manual for this torque wrench (4405)?

Hello,

I recently bought a SigSauer P226 9mm (made in 1992) with a J.Peters barrel.

I wonder if this is a barrel from Peters Stalh or is it something diferent?

Does anyone know anything about this "J.Peters"?

Thank You,

I don't now if this helps. I had some ignitions problems with Eley Match ammo, the firing pin just didn't dent the rim enough for the ammunition to fire. It still worked with other ammo, that had thicker rims, such as the Eley club. I replace the firing pin spring and that fixed my problem. Regardin...

Hello,

Does anybody known the dimensional of the Pardini K10 seals (o-rings)?

Thank You,
TQB

By the way Gerard,

Is it worth trading up the K10 for the K12?

Gerard,

The pistol does not discharge air through the muzzle. It seems to "lose" air sudently through the breech or the treaded connection if the air cylinder is not attached.

By the way, is there a easy way of removing the old seals (o-rings) without destroying them?

Thank You,
TQB

Hello, I own a Pardini K10 and I have some questions about it. For some time I've noticed that if the pistol is left open and cocked, after a minute or so, it discharges the compressed air quite quickly (not through the muzzle, though). I've noticed that it happens as well if I remove the air cylind...

Today I a shot a Anschutz Match 54. I enjoyed the expirience, but as it would be expected, since it is my first time with a match rifle, I need to learn a lot. I will have to adjust the buttplate, so it can move a bit more up. My face when supported in the cheek piece does not allow me to view the f...

Hello,

What rifle would you sugest to start in 50m prone?

If possible include some older rifles which can be less expensive.

Thank You.

Hello,

I have a Pardini PGP 75 and I would like to ask if it is possible to remove the front sight holder.
If it is possible, can a Pardini FPM compensator be installed? Will it have a positive effect, as it does in the FPM?

Thank You.

Thank You.

I will try to find the screw in the morning.

Thank You again.

Hello,

Is it possible to remove the Front sight holder of a Pardini PGP 75 in order to install a Morini Compensator?

Thank You.

One more question.

Those of you that have acess to PGP 75 with several size grips (ex: at clubs), can you tell me if there are diferences in the rake angle between diferente grip sizes?

Thank You.

Thank You all.

I will try to find a suitable rubber grommet. Just in case I've asked the Portuguese Pardini dealer for the 53 part.

In a few days I'll find out the cost of the part, and decide if I'll buy it or try to find some other way.

Thank You. I will try to straigthen the rod. The main problem is that now it is pushing against the barrel when assembled. After taking the pistol apart to clean the barrel I can't put it together without having to remove the rod. Besides.... The grip has begun to crack trough a vein in the wood tha...

Hello. I'm having problems with my Pardini PGP 75. The rod used to install the weights seems to be bent. The rod is touching the barrel at the top. Can you please check if your rod is similar or if it's only mine that is this way. http://cms.piso5.net/images/PGP75/05.jpg http://cms.piso5.net/images/...

Thank You Trooperjake.

Hello, Yesterday I shot a Walther GSP .32 Wadcutter, and I liked the feel of the pistol. I was considering the purchase of a .32 pistol, therefore I wanted to ask you your opinions. At the moment I'm considering the Walther GSP and the Pardini HP. What are your thoughts on these pistols and are ther...

By the way, will a nylon brush be as effective on the chamber?
And why 25 caliber and not 22? Is it because the chamber is slightly larger than the bore?